Beschreibung:
<jats:p>One of the most used tyre models is the so-called Magic Formula, which provides the contact forces and moments as a function of the tyre slips and normal load. Among the slip inputs, there is the spin–slip, which is defined as the combination of a camber component and a path-curvature component. The two components are related to each other by the camber reduction factor, for which only a few data have been reported in the literature. In addition, these data are often obtained from indirect measurements. In this work, an experimental procedure for the direct measurement of the camber reduction factor was devised, and applied to six specimens of motorcycle tyres (three front and three rear). The approach employs a rotating-disk machine, where the tyre is intrinsically subjected to path curvature. A specific aligning procedure to mitigate sideslip disturbances is introduced and employed during testing. The three specimens of the rear tyres tested showed a camber reduction factor that was close to zero, which is the typical result suggested by the literature. On the contrary, the three specimens of front tyres showed slightly negative values, i.e., the camber component increased with respect to the curvature component. The results suggest that the classic assumption of a zero camber reduction factor does not hold valid for all motorcycle tyres.</jats:p>